Reduce the time it takes to design bracelets and necklaces with Chain Sta.
- Determine length of bracelet or necklace.
- Poles can be rotated to accommodate a variety of chain lengths.
- Place ends in the Chain Stä clips.
- Straighten chain so links are not twisted.
- Attach charms/dangles to chain.
Helpful Hints:
Attach clasp to chain before using your Chain Stä.
- Mark center link of chain with wire or paper clip.
- If clasp is too large for the Chain Stä clips, place clasp over the posts on top of clips.
- The same method will work well when making necklaces: working from the center, let excess chain hang off the ends of the Chain Stä clips.
- If the chain is very short, temporarily lengthen your chain with an item, such as a paper clip or safety pin. Place the paperclip/safety pin in the Chain Stä clamps, just as you would a clasp.
- When making a necklace with your Chain Stä determine the finished length of the necklace. Work out from the center link for about 4" on each side for a total of about 8", more if you prefer. Let the excess chain hang from the Chain Stä clips while working.
- *Please consider the actual sizes given in the listing as the pictures are generally enlarged to show detail.